De Dietrich DTG 1138 Serie Guide D'installation Et D'utilisation page 55

3 / USING YOUR APPLIANCE
DESCRIPTION OF THE CONTROLS (1 high-power burner model
•
DTG 1008*)
A
A
On/off touch controls
B Power level touch control
Timer touch controls
C
LIGHTING THE GAS BURNERS
•
To use a function touch control...
Place your finger squarely on the chosen
touch control until the display shows the new
setting.
You can either use the central burner on its
own (controls on the left
the entire burner (central burner + outside
ring) (controls on the right
It is not possible to use only the outside ring.
The direct access touch controls and
on the controls
central burner and the outside ring.
TURNING OFF
•
Press touch control for the zone you want
to use or power touch control
displayed.
B
), or you can use
).
C
affect the
until 0 is
C
• ADJUSTING THE POWER LEVEL
Press touch control
power level between 1 and 9.
When the appliance is switched on, you can
move directly to maximum power by pressing
touch control
touch control
or
Tip
- Your appliance is fitted with a timer.
Refer to the paragraph "Using the timer"
for details of how it works.
55
or to adjust your
or to minimum power with
.
EN