De Dietrich DTG 1138 Serie Guide D'installation Et D'utilisation page 43

2 / INSTALLING YOUR APPLIANCE
GAS CONNECTION
•
The hob must be connected to the gas supply
in accordance with the regulations in the
country of installation.
Gas distributed via a natural
•
gas network
For your safety, you must choose from the
three following connection options:
— Use rigid copper pipe with screw-on
mechanical connectors (G1/2 gas standard
mark). Connect directly to the elbow joint
fitted on the appliance.
— Use a flexible metal corrugated hose
(stainless steel) with screw-on mechanical
connectors (compliant with standard NF D
36-121) with an unlimited guarantee (Fig. A).
— Use a reinforced rubber hose with screw-
on mechanical connectors (compliant with
standard NF D 36-103) with a 10-year
guarantee (Fig. B).
@ Q
fig.A
Q @
Flexible metallic
corrugated hose with
mechanical connectors
43
EN
fig.B
Flexible hose
with mechanical
connectors
Fig. 01