Scope Of Delivery; Warranty Conditions; Master Code - Burkert 8630 Instructions De Service

1.4

Scope of delivery

Check the contents of the delivery for damage and agreement with the details specified on the delivery note immediately
following receipt. This normally comprises:
• pneumatically actuated valve of types 2652, 2655, 2672, 2700, 2712, 2730, 2731 or 2731K with the Top Control Continuous
• operating instructions for the valve with pneumatic drive
• operating instructions for the Top Control Continuous
Suitable cable plugs for the multipole connection are available as accessories.
In the event of discrepancies, please contact our service department immediately:
or your local Bürkert branch.
1.5

Warranty conditions

This document contains no warranty promises. We refer in this connection to our General Conditions of Sale and Business. The
condition for the warranty is use of the unit for the intended purpose under the specified application conditions.
ATTENTION!
The guarantee only covers faults in the Top Control Continuous, and in the integrated pneumatically-driven
valve. No liability will, however, be accepted for subsequent damage of any kind that may arise as a result of
the failure or incorrect functioning of the device.
1.6

Master code

Operation of the device can be locked via a freely selectable user code. Independent of this, there is an unalterable master
code with which you can carry out all operations on the device. This 4-digit master code is printed on the last page of these
operating instructions.
If needed you can cut out this code and store it separately from these operating instructions.
88
Bürkert Steuer- und Regelungstechnik
Chr.-Bürkert-Str. 13-17
Service-Abteilung
D-76453 Ingelfingen
Tel.: (07940) 10-252
Fax: (07940) 10-428
Operating instructions no. 800607