First Class Millennium Controls And Signals - ELMECO First 1 Class Manuel Pour L'emploi Et L'entretien

First Class Millennium controls and signals

Warning! Do not wash the membrane of the electronic control with abrasive substances or cloths.
Warning! The screen with the "/" symbol indicates that the values are shown alternatively.
Warning! The electronic board will keep the settings it had when the machine was switched off.
• When you switch on the machine (pic.7 pag.82), the following menu will be displayed:
SLUSH / MACHINE
V.32Eb4
In standby mode the auger and the refrigerator system are stopped.
• Press the
key to start the augers rotation. The following menu is displayed:
• To stop the augers rotation, and come back in standby mode, press the
• Pressing the
button, you can select "COLD MODE", "SLUSH MODE" or return to "MOTOR ON"
condition in which the augers rotate. According to the display setting you can see:
MOTOR ON
Press
• The COLD function, cold drink, it allows to have a liquid and cold product in the tank. The Y value can be set
between 2 and 5 using the
Under COLD and SLUSH modes increases the temperature
value or the density value.
Within the menu: changes the status of function/value
selected
Under COLD and SLUSH modes decreases the temperature
value or the density value.
Within the menu: changes the status of function/value
selected
Enter/Exit from the Menu
Within the menu: modify TIME or DEFROST, confirm the
selected value and goes in the next function
Start/Stop rotation of the augers.
Within the menu: modify TIME or DEFROST, horizontal scroll
to the right between the values to be modified
Mode selector key: Motor On - COLD - SLUSH
Within the menu: modify TIME or DEFROST, horizontal scroll
to the left between the values to be modified
And then
MOTOR ON
Press
COLD
Y
or buttons and indicates a more or less cold product respectively.
- 27 -
StandBy
Press
key.
SLUSH
X