ELMECO First 1 Class Manuel Pour L'emploi Et L'entretien page 30

• The SLUSH function allows to have a slush in the tank. The X value can be set between 1 and 9 using the
or buttons and indicates a less or more slush viscosity product respectively.
Warning! After each restart of the machine, if the product temperature is higher than 10°C and SLUSH
mode is selected, the following screen will be displayed:
This screen indicates that the calibration process is taking place. The calibration process will take one
minute to complete
• Pressing the
button on the electronic board, for more than one second, it possible to enter into menu
functions.
• To select the menu functions, press the
• Please note if any buttons are pressed on the electronic board for more than 10 seconds, the display will
automatically go back to the initial screen. This at the exception of DEFROST screens
• The menu functions will appear in the following order:
• Pressing on the
or
• Pressing on the
function. It is OFF by default. This, for security reasons, stops the augers rotating when the lid is removed.
However, the augers stop can be also caused by a malfunctioning of 1 and/or 2 contacts, or by the
accidental lost of one of the contact during the cleaning. To let to customer run the machine while waiting
for the assistance, it's possible to select BYPASS ON.
Warning! The BYPASS mode must be turned OFF immediately after the assistance fix the problem
• Pressing on the
or
function. When the function is ON, the electronic board automatically will decrease the slush viscosity to
no.1 when the level probe is not covered with product for more than 20 minutes. The following screen will
be displayed:
If product is filled (liquid touches the level probe), the function will be deactivated and the slush
preparation will reach the viscosity value that was previously set on the electronic board.
AUTO/SETTING/SLUSH
button repeatedly.
button it will be possible to turn on (ON) or turn off (OFF) the lights in the lid.
or button it will be possible to activate (ON) or deactivate (OFF) the BYPASS
button it will be possible to activate (ON) or deactivate (OFF) the LOW LEVEL
PLEASE / REFILL / LOW LEVEL
UNLOCK/LOCK
X
LAMP
ON/OFF
BYPASS
ON/OFF
LOW LEVEL
ON/OFF
1L
KEYBOARD
- 28 -