ELMECO First 1 Class Manuel Pour L'emploi Et L'entretien page 34

If the mixture contains alcoholic product, consider that 15%, on total mixture, is the maximum value
that can come into contact with plastic parts.
Switch on the main switch (see pic. 7 pag.82).
• Slush production.
Selected the SLUSH mode as described on page 27.
SLUSH
Less dense
Vary the viscosity of the product from 1 to 9 using the
respectively.
Setting the value 1 there will be a slush less viscous and waterier, while the value 9 is the maximum
possible viscosity and the machine make a very dense slush.
• Cold drink production.
Selected the COLD mode as described on page 27.
Cold
Vary the product temperature from 2 to 5 using the
respectively.
Setting the value 2 will result in a product at a lower temperature compared to the value 5.
In COLD mode should not be formed slush.
The reccomended value is "4".
Warning! In order to have slush, sherbets or cold drink, you need a small quantity of sugar per liter. The
recommended quantity is generally reported in the usage instructions. In case of natural products, we
suggest to use a quantity that goes from 12 and 22%.
Warning! If the horizontal auger is blocked because of ice blocks due to a lack of sugar or to other
reasons, such as foreign bodies in the tank, the augers can undergo a break.
Warning! If the product freeze completely turn off the machine, wait until the product becomes
completely liquid, empty the tank and check the cause of the problem (ie. Lack of sugar, failure to close
solenoid valve, etc.).
Warning! The product must be maintained at a temperature not exceeding 5°C for periods specified by
the manufacturer, but for not more than 5 days. In case of failure of the refrigerator system the product
should be inspected to determine whether it has deteriorated.
Warning! If the room temperature exceeds 35°C Elmeco is not responsible for the refrigerator
performance (that will be slower) and for the correspondence between the temperature selected on
the electronic board and the
1
COLD
5
drink temperature.
cold
or button to increase or decrease it
or button to increase or decrease it
- 32 -
SLUSH
Denser
9
COLD
Colder
2