ELMECO First 1 Class Manuel Pour L'emploi Et L'entretien page 32

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ON
The two screens indicate the start time (ON) and the end time (OFF) of the DEFROST function. This function
allows the product to return to the liquid state, according to the regulations, during the selected time
window. If the two times coincide, the function is deactivated.
To change the ON and OFF times follow the procedure below:
1) Press the
button;
2) The first value of DEFROST ON will start to blink. For change it press
3) Repeat the steps 1) and 2) until all DEFROST ON values are set;
4) Press the
button to exit from DEFROST ON time setup and go in DEFROST OFF time setup. The
first value of DEFROST OFF will start to blink. For change it press
5) Repeat the steps 1) and 2) until all DEFROST OFF values are set;
6) Press the
button to exit from DEFROST OFF time setup. The DEFROST ON/OFF times have been
saved.
Warning! When the defrost is active the top light is turned off, even if the electronic board is set to
light on "LAMP ON". On deactivation of the defrost the top light returns to the previous state.
• Pressing on the
function. When the machine is turned on, if the function is active and the product temperature is higher
than the "4" critical value, the display will blink and show
In order to stop the warning signal, please press the
• The CLEANING function is used if the user wants the machine to show a clear warning on the display that
reminds to clean it. If the CLEANING function is set on (000d----), is deactivated.
In order to activate it:
1) Press the
button;
2) The first value of CLEANING will start to blink. For change it press
3) Repeat the steps 1) and 2) until all CLEANING values are set;
4) Press the
button to exit and save the cleaning days previously set.
When the machine is turned on, if the CLEANING values are zero (- ---), the display will blink showing the
cleaning warning:
DEFROST
00:00
or
button it will be possible to activate (ON) or deactivate (OFF) the MAX TEMP
button;
MAX TEMP
ON/OFF
PRODUCT
T>4
button.
CLEANING
000d - ---
- 30 -
DEFROST
OFF
00:00
button;
button;

Publicité

Table des Matières
loading

Table des Matières