Stihl ASP 100 Manuel D'utilisation page 37

● Start the engine.
(See instruction manual of the ride-on
mower)
● If necessary, turn the light on.
(See instruction manual of the ride-on
mower)
● Raise the snow plough into the
transport position. ( 13.2)
● Drive the ride-on mower onto the area
to be cleared.
(See instruction manual of the ride-on
mower)
● Set the throttle lever to the MAX
position. The throttle lever must always
be in the MAX position while clearing
snow.
(See instruction manual of the ride-on
mower)
● Swivel the snow plough into the desired
position. ( 10.2)
● Lower the snow plough into the working
position. ( 13.3)
Risk of injury!
For models with a manual gearbox,
snowploughing may only be
performed in first gear for safety
reasons.
● With the clutch/brake pedal pressed
down, select first gear.
(See instruction manual of the ride-on
mower)
● Slowly release the clutch/brake pedal.
(See instruction manual of the ride-on
mower)
Braking (manual gearbox):
● Press the clutch/brake pedal down
evenly and hold. The ride-on mower
stops.
(See instruction manual of the ride-on
mower)
0478 907 9930 A - EN
● Place the snow plough in the transport
position if necessary. ( 13.2)
13.6 Parking the ride-on mower with
snow plough
Risk of injury!
For safety reasons, always lower
the snow plough completely when
storing the ride-on mower.
● Park the ride-on mower safely.
(See instruction manual of the ride-on
mower)
● Engage the parking brake.
(See instruction manual of the ride-on
mower)
● Lower the snow plough completely
(working position) ( 13.3)
14. Maintenance
Risk of injury!
Read and observe the section "For
your safety" before all maintenance
and repair work. ( 4.)
Also carefully read and observe the
section "For your safety" in the
instruction manual of the ride-on
mower.
Remove the ignition key and keep
in a safe place before performing
any maintenance, repair or
cleaning operations (see instruction
manual of the ride-on mower).
Danger of burns!
Allow the machine (ride-on mower)
to cool down completely before
performing any maintenance
operations. Pay particular attention
to the area around the exhaust.
Note
Always lower the snow plough
completely before opening the
engine hood. ( 13.3)
14.1 General
The "Maintenance" section refers to the
snow plough only.
It is essential that these points are
observed prior to maintenance, repair
and cleaning work:
● Park the ride-on mower on level and
solid ground.
● Stop the engine (see instruction manual
of the ride-on mower).
● Lower the snow plough completely
(working position). ( 13.3)
● Remove the ignition key and keep in a
safe place (see instruction manual of
the ride-on mower).
● Engage the parking brake.
(See instruction manual of the ride-on
mower)
● Allow the engine to cool down.
● Remove the ignition key (see
instruction manual of the ride-on
mower).
● Carefully read and observe the section
"For your safety". ( 4.)
14.2 Maintenance schedule
The specified maintenance intervals must
be strictly observed.
35