Stihl ASP 100 Manuel D'utilisation page 41

manufacturer's STIHL
brand:
type: ASP 125.1
serial number 6907
conforms to the following EC directives:
2006/42/EC
The versions of the standards valid on the
production date apply to development and
production of the products.
Compilation and storage of technical
documentation:
Sven Zimmermann
STIHL Tirol GmbH
The year of manufacture and machine
number appear on the rating plate of the
machine.
The special technical documents have
been drafted in accordance with Appendix
VII Part B (2006/42/EC).
National authorities will be provided with
the special documents regarding the
incomplete machine in printed or digital
form upon well-founded request.
The snow plough may only be operated if
the ride-on mower is in good operating
condition. The safety instructions in the
relevant instruction manual must be
observed.
Langkampfen,
2021-01-02 (YYYY-MM-DD)
STIHL Tirol GmbH
0478 907 9930 A - EN
p.p.
Matthias Fleischer, Research and
Development Division Manager
p.p.
Sven Zimmermann, Quality Division
Manager
21. Technical specifications
ASP 100.1:
Snow plough width 1000 mm
Snow plough height 500 mm
Working width in cen-
tre position 1000 mm
Working width in
angled position 872 mm
Weight 46 kg
ASP 125.1:
Snow plough width 1250 mm
Snow plough height 500 mm
Working width in cen-
tre position 1250 mm
Working width in
angled position 1088 mm
Weight 50 kg
Dimensions:
ASP 100.1:
Overall length: 637 mm
ASP 125.1:
Overall length: 637 mm
22. Troubleshooting
If necessary, contact a specialist
dealer; STIHL recommends STIHL
specialist dealers.
Fault:
RT 5097/ C/ Z, RT 5112 Z,
RT 6112 C/ ZL, RT 6127 ZL:
Starter not functioning. It is not possible to
start the engine.
Possible cause:
– The cover is not installed (when using
the snow plough).
– The safety devices are blocking the
starter.
Remedy:
– Install the cover. ( 9.1)
– Check the safety devices (see
instruction manual for the ride-on
mower).
39