Stihl ASP 100 Manuel D'utilisation page 40

16. Transport
16.1 Lifting the snow plough
Risk of injury!
The snow plough should only be
lifted with the help of a second
person. Take account of the weight
of the snow plough. (
Do not hold the snow plough at
moving parts when lifting it.
Always wear safety shoes with
high-grip soles when lifting the
snow plough.
● Hold the snow plough at handles (A)
and lift.
16.2 Transporting the ride-on mower
with installed snow plough
Risk of accident!
Before transport, carefully read and
observe the section "For your
safety". ( 4.)
Also observe the section "For your
safety" in the instruction manual of
the ride-on mower.
If the ride-on mower with installed
snow plough is transported on a
load floor or a trailer, the snow
plough must always be in the
working position during transport.
Take account of the overall weight
when loading.
● Adjust the lift rod to the maximum lift
position. ( 15.3)
38
● Place the snow plough in the transport
position and drive onto the load floor
with the ride-on mower. Then engage
the parking brake. (
● Lower the snow plough into the working
position. (
22
● Secure the ride-on mower using
adequately-dimensioned fastening
materials (belts, ropes, etc.).
21.)
17. Standard spare parts
Slide bar: 6907 731 8305
Gauge wheels: 6170 704 9700
18. Accessories
Note
For safe and better operation of the
ride-on mower during winter
(different external conditions),
additional accessories are
recommended.
18.1 Snow chains
Snow chains improve the traction of the
rear wheels on icy or snow-covered
surfaces.
Snow chains, 16 inches ASK 016:
6907 730 3445
Snow chains, 18 inches ASK 018:
6907 730 3432
Snow chains, 20 inches ASK 020:
6907 730 3437
13.2)
13.3)
Note
Note that using snow chains can
damage (scratch) the underlying
surface (flagstones, asphalt, etc.).
19. Environmental protection
The machine, its packaging and
accessories are all produced
from recyclable materials and
must be disposed of
accordingly.
By disposing of materials separately and in
an environmentally friendly manner,
recyclable waste can be re-used. For this
reason, the machine should be disposed
of for recycling at the end of its useful life.
Pay particular attention to the information
in the section "Disposal" during disposal.
( 4.5)
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.
20. Declaration on the
installation of an incomplete
machine
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
the incomplete machine
snow plough,
manufacturer's STIHL
brand:
type: ASP 100.1
serial number 6907
0478 907 9930 A - EN