Publicité
Les langues disponibles
Les langues disponibles
11.1 Clearing large areas
Examples:
Wide driveway, car park, courtyard, etc.
Tips:
● Bring the snow plough into the straight
position (90° to driving direction).
● Depending on the height and
characteristics of the snow in the centre
of the area to plough, clear a path
(track) with the ride-on mower or snow
shovel first.
● Gradually remove an appropriate
amount of snow from the left and right
snow-covered area; adjust the width
based on the height and characteristics
of the snow and traction of the wheels.
Repeat this procedure until the entire
surface is cleared.
11.2 Snowploughing paths
Examples:
Narrow path in a park, etc.
Tip:
● Swivel the snow plough to the left or
right and allow it to engage. Clear the
path by following its course carefully.
0478 907 9930 A - EN
12. Preparing the ride-on
mower for winter use
12.1 Precautions for winter operation
Note
Because of the cold and damp
conditions, various precautions
need to be taken for use in winter.
These precautions ensure that the
mower is ready for use and prevent
damage to the machine.
Recommendations for safe winter
operation of the ride-on mower:
● At low temperatures, use HD 15 W40
grade engine oil.
● After using the ride-on mower, store it in
a closed, well-ventilated room (garage).
If possible, do not leave the machine
outdoors.
Risk of injury!
Petrol represents an explosive
hazard!
Never park the ride-on mower near
a heat source.
13. Operating the machine
Risk of injury!
Carefully read and observe the
section "For your safety" before
operating the machine. (
Observe all information regarding
safe operation of the machine.
In addition, observe all safety
instructions contained in the
instruction manual of the ride-on
mower.
The additional weight, modified
weight distribution (changed centre
of gravity) and increased overall
length when the snow plough is
attached to the ride-on mower
change the handling characteristics
of the mower.
● Before use, check the settings on the
snow plough and adjust them if
necessary. (
15.)
● Familiarise yourself with all of the
controls of the snow plough before
using it. (
10.)
● Familiarise yourself with all of the
controls of the ride-on mower before
using it.
13.1 Preparing the ride-on mower for
operation
● RT 4097 S/ SX, RT 4112 S/ SZ:
Remove the mowing deck.
(See instruction manual of the ride-on
mower)
4.)
33
Publicité
