Scope Of Delivery; Installation - T.I.P. HWW 6000 EPF Traduction Du Mode D'emploi D'origine

Translation of original operating instructions
The device is not suitable for use in swimming pools or for installation in public
water mains.
This booster set of T.I.P. is intended for private home use only and not for com-
mercial or industrial purposes or for continuous circulating.
The pump is not suited to discharge saltwater, faeces, inflamma-
ble, etching, explosive or other hazardous liquids. Please ob-
serve the max. and min. temperatures of the liquids to be dis-
charged stated in the technical data.

4. Scope of delivery

The scope of the delivery of this product includes:
Booster set with electronic control, integrated filter, a connection cord and one
operating manual.
Please verify that the scope of delivery is complete. Depending on the purpose of
the application, additional accessories may be necessary (please refer to the
chapters titled "Installation" and "How to order spare parts").
If possible, keep the packing until the warranty period has expired. Please dis-
pose of the packing materials in an environmental-friendly manner.

5. Installation

5.1. General installation information
During the entire process of installation, the device must not be con-
nected to the electrical mains.
The pump should be installed in a dry place with an ambient tempera-
ture not to fall below 5 °C. The pump and the entire connection system
have to be protected from frost and other climatic influences.
When installing the device, please make sure that the motor is suffi-
ciently ventilated.
All connection lines have to be perfectly tight since leaking lines may affect the
performance of the pump and cause considerable damage. Therefore, please
cause damage. When laying the connection pipes, you should make sure that
use Teflon tape to seal the
contact surfaces between the
Fig.1
threaded sections of the lines
and the connection with the
pump (Fig.1). This use of seal-
ing material such as Teflon
tape is the only way to ensure
an airtight assembly.
Avoid when tightening screw
excessive force that may
4
23