T.I.P. HWW 6000 EPF Traduction Du Mode D'emploi D'origine page 23

Translation of original operating instructions
The pump must be supplied through a residual current de-
vice (RCD) having a rated residual operating current not
exceeding 30mA.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified per-
sons in order to avoid a hazard.
Disconnect the device from the power supply and let it
cool down before cleaning and maintenance is performed
and before the device is stored.
Always protect electrical parts against moisture. During
cleaning or operation, they must not be immersed in water
or other liquids to ensure that an electrical shock is pre-
vented. Never hold the device under running water.
Please follow the instructions of "Maintenance and troub-
leshooting".
Notes and instructions with the following symbols require
particular attention:
Any nonobservance of these instructions involves
the danger of bodily harm to people and/or dam-
age to property.
Any nonobservance of this instruction bears the
risk of an electrical shock which may cause dam-
age to persons or property.
Please inspect the device for damage occurred during transportation. In case of
damage, the retailer has to be informed immediately, at the latest within 8 days
after the date of purchase.
2
21