Magmaweld ID 500 M PULSE EXPERT Manuel D'utilisation page 27

ID 500 M/MW PULSE EXPERT
PAGE 7
A) D.PULSE CURRENT ADJ. (DOUBLE PULSE CURRENT ADJUSTMENT)
It operates as a percentage of the main current. The minimum and maximum current range to which the double pulse will go will be determined.
Setting Range
• %5-50
The display shows both the setting in terms of percentage and the maximum and minimum current values.
For Example;
D. Pulse Current Adj.
%10 129 / 106
b) D.PULSE TIME ADJ. (DOUBLE PULSE TIME ADJUSTMENT)
When double pulse method is selected, the time of maximum and minimum current will be determined as a percentage.
Setting Range
• %20-80
The % value displayed on the screen is the time at which the maximum current is displayed.
For Example;
D. Pulse Current Adj.
%10 129 / 106
D. Pulse Time Adj.
%20
www.magmaweld.com
Let the current be set to 118 A. If the 10% current setting range is selected, the value will be read as 129/106.
That is, 10% more of 118 and 10% less than 118 will be displayed on the screen.
Let the current be set to 118 A. If the 10% current setting range is selected, the value will be read as 129/106.
That is, 10% more of 118 and 10% less than 118 will be displayed on the screen. If the D. pulse time setting is
set to 20%, it holds 129 A in 20% in the double pulse function and 106 A in 80%.
USER MANUAL | MANUEL D'UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
Operation 27
EN