Operation; User Interface - Magmaweld ID 500 M PULSE EXPERT Manuel D'utilisation

ID 500 M/MW PULSE EXPERT

OPERATION

3.1 User Interface

Digital Display
Shows the menu contents. All menu parameters are available on digital display.
Depending on the selected Mode, shows wire speed and welding current in the idle or loaded position. Displays the
error code.
Synergic Mode
Smart Mode
Classic Mode
Depending on the selected Mode, shows the idle value or welding voltage at the time of welding.
Synergic Mode
Smart Mode
Classic Mode
Depending on the selected Mode, welding set current adjustment will be done with the help of the adjustment knob.
The current will be adjusted by turning the adjustment knob to the right and left.
Depending on the selected Mode, welding set voltage adjustment will be done with the help of the adjustment knob.
The voltage will be adjusted by turning the adjustment knob to the right and left.
www.magmaweld.com
Idle Load
Welding Set Current Welding Current
Welding Set Current Welding Current
Wire Speed Welding Current
Idle Load
Welding Set Voltage Welding Current
Welding Set Voltage Welding Current
Welding Set Voltage Welding Current
USER MANUAL | MANUEL D'UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
Operation 17
EN