Communications; Web Management Card; Webcardlx Features; Relay Card - Tripp-Lite SmartOnline S3M Serie Manuel Du Propriétaire

6. Communications

6.1 Web Management Card

Tripp Lite's WEBCARDLX is an optional accessory available for all models. The
WEBCARDLX card enables remote monitoring and control through several interfaces:
HTML5 web via HTTP(S), menu/CLI via SSH/Telnet, and SNMP for integration with
software management platforms, such as DCIM. Using WEBCARDLX in your UPS
combined with Tripp Lite's network-enabled switched PDUs, you can manage power
throughout your facility and receive automated alerts to identify problems before they
cause downtime.
WEBCARDLX also supports a family of sensors for remotely monitoring environmental
conditions. You can link up to three sensors together, connecting them to a single
port on the WEBCARDLX. Tripp Lite offers free PowerAlert
System software. Learn more and download at tripplite.com/products/power-alert.

6.1.1 WEBCARDLX Features

The following is an introduction to the features of
Tripp Lite's WEBCARDLX. To view the full description of
the card's functionality, download its Owner's Manual at
tripplite.com/support.
A
Ethernet Port: RJ45 jack connects the WEBCARDLX
to the network using a standard Ethernet patch
cable. The Link LED
A1
the operating conditions.
B
Micro-USB Port: Use this port to directly connect
with a computer running a terminal emulation program.
C
Type-A USB Port: Use this port to connect a Tripp Lite ENVIROSENSE 2 module (E2MT, E2MTDO, E2MTDI, E2MTHDI) for a
variety of environmental monitoring and control options. See tripplite.com for more information about these modules.
Note: Do not connect a keyboard or mouse to this port.
D
Reset Button: The reset button is recessed, accessible through a small hole under the RJ45 network port.
E
Status LED: Shows WEBCARDLX status.

6.2 Relay Card

A 10-pin terminal supports a relay card to provide bypass, utility failure, inverter on, battery low, UPS fault, UPS alarm and UPS
shutdown functions.
The relay communication card contains six dry contact outputs and one dry input. The inputs and outputs are factory
programmed according to functions listed in the following table.
Relay Contacts (Communication Card)
Pin Function Description
1 Utility Failure
2
Battery Low
3
4 Bypass On
5 UPS Fault
6 Inverter On
7 Summary Alarm
8 Common
9 Remote Shutdown +
and Status LED indicate
A2
Input or Output
Output
Input (5V to12V)
Network Management
®
73