Dual Input (Mains And Bypass) Connection - Tripp-Lite SmartOnline S3M Serie Manuel Du Propriétaire

3. Installation and Wiring
INPUT Primary input Line
Vin-L1: Primary input Phase L1
Vin-L2: Primary input Phase L2
Vin-L3: Primary input Phase L3
Vin-N: Input Neutral for primary and secondary input

3.12 Dual Input (Mains and Bypass) Connection

Note: The UPS unit is defaulted to single input mode, as shown in Figure 3-10. Remove the shorting jumpers to use in dual input mode.
Figure 3-13: Dual Input Connection, Models S3M25K and S3M30K
OUTPUT
Vout-L1: Output Phase L1
Vout -L2: Output Phase L2
Vout -L3: Output Phase L3
Vout -N: Output Neutral
PE: Grounding
BAT+: Positive terminal of the batteries string
BATN: Neutral terminal of the batteries string
BAT-: Negative terminal of the batteries string
29