Menu de configuration
Information
supplémentaire
Safety distance
Navigation
Description
Entrée
Réglage usine
Information
supplémentaire
Hysteresis
Navigation
Description
Entrée
Réglage usine
Information
supplémentaire
Water density
Navigation
Description
Entrée
Réglage usine
280
Accès en lecture
Accès en écriture
Setup → Advanced setup → Application → Tank calculation → HTMS → Safety
distance
Defines the minimum level which must be present above the bottom pressure sensor
before its signal is used for the calculation.
0 ... 10 000 mm
2 000 mm
Accès en lecture
Accès en écriture
Setup → Advanced setup → Application → Tank calculation → HTMS → Hysteresis
Defines the hysteresis for the HTMS calculation. Prevents constant switching if the level is
near the switch-over point.
0 ... 2 000 mm
50 mm
Accès en lecture
Accès en écriture
Setup → Advanced setup → Application → Tank calculation → HTMS → Water
density
Density of the water in the tank.
Nombre à virgule flottante avec signe
1 000 kg/m³
Operator
Maintenance
Operator
Maintenance
Operator
Maintenance
Proservo NMS80
Endress+Hauser