Endress+Hauser Proservo NMS80 Manuel De Mise En Service page 207

Proservo NMS80
Sélection
Réglage usine
Information
supplémentaire
RTD connection type
Navigation
Prérequis
Description
Sélection
Réglage usine
Information
supplémentaire
Process value
Navigation
Prérequis
Description
Endress+Hauser
• Cu50 (w=1.428, GOST)
• Cu53 (w=1.426, GOST)
• Cu90@0°C (w=1.4274, GOST)
• Cu100@25°C (w=1.4274, GOST)
• Cu100@0°C(w=1.4274, GOST)
• Pt46 (w=1.391, GOST)
• Pt50 (w=1.391, GOST)
• Pt100(385) (a=0.00385, IEC751)
• Pt100(389) (a=0.00389, Canadian)
• Pt100(391) (a=0.003916, JIS1604)
• Pt100 (w=1.391, GOST)
• Pt500(385) (a=0.00385, IEC751)
• Pt1000(385) (a=0.00385, IEC751)
• Ni100(617) (a=0.00617, DIN43760)
• Ni120(672) (a=0.00672, DIN43760)
• Ni1000(617) (a=0.00617, DIN43760)
Pt100(385) (a=0.00385, IEC751)
Accès en lecture
Accès en écriture
 Setup → Advanced setup → Input/output → Analog IP → RTD connection type
Operating mode (→  206) = RTD temperature input
Defines the connection type of the RTD.
• 4 wire RTD connection
• 2 wire RTD connection
• 3 wire RTD connection
4 wire RTD connection
Accès en lecture
Accès en écriture
 Setup → Advanced setup → Input/output → Analog IP → Process value
Operating mode (→  206) ≠ Disabled
Shows the measured value received via the analog input.
Operator
Maintenance
Operator
Maintenance
Menu de configuration

207