Endress+Hauser Proservo NMS80 Manuel De Mise En Service page 256

Menu de configuration
Air temperature
Navigation
Description
Information
supplémentaire
Vapor temp source
Navigation
Description
Sélection
Réglage usine
Information
supplémentaire
Manual vapor temperature
Navigation
Prérequis
Description
Entrée
Réglage usine
Information
supplémentaire
256
 Setup → Advanced setup → Application → Tank configuration → Temperature → Air
temperature
Shows the air temperature.
Accès en lecture
Accès en écriture
 Setup → Advanced setup → Application → Tank configuration → Temperature
→ Vapor temp source
Defines the source from which the vapor temperature is obtained.
• Manual value
• HART device 1 ... 15 vapor temp
• AIO B1-3 value
• AIO C1-3 value
• AIP B4-8 value
• AIP C4-8 value
Manual value
Accès en lecture
Accès en écriture
 Setup → Advanced setup → Application → Tank configuration → Temperature
→ Manual vapor temperature
Vapor temp source (→  256) = Manual value
Defines the manual value of the vapor temperature.
–50 ... 300 °C
25 °C
Accès en lecture
Accès en écriture
Operator
-
Operator
Maintenance
Operator
Maintenance
Proservo NMS80


Endress+Hauser