Description Of Icons And Leds - Burkert 8026 Guide Rapide

Type 8026 - 8036 - SE36
Adjustment and commissioning
8.6 Description of icons and lEDs
• The display module is not available on all versions of the device. The display module is can be ordered as an accessory.
ERR
Red LED: shows
an error.
Yellow LED: shows that transis-
tor 1 is switched
Fig. 23: Position of the icons and description of the LEDs
• The LEDs of the display module are duplicated on the electronic board that is located under the display module: these LEDs
become visible when the device is not equipped with the display module.
• The yellow LED related to a transistor output is deactivated if the transistor output is configured in pulse mode ("Pulse").
flow_l
600.0l/h
flow_m3
0.60/h
not used
Yellow LED: shows that transistor 2
is switched
Yellow LED: shows that
transistor 1 is switched
Yellow LED: shows that
transistor 2 is switched
English
Green LED: shows that
the device is energized
Red LED: shows an error.
31