Intended Use - Burkert 8026 Guide Rapide

Type 8026 - 8036 - SE36

Intended use

note
warns against material damage.
▶ Failure to observe this warning may result in damage to the
device or system.
Indicates additional information, advice or important
recommendations.
Refers to information contained in this manual or in other
documents.
▶ Indicates an instruction to be carried out to avoid a danger, a
warning or a possible risk.
→
Indicates a procedure to be carried out.
Indicates the result of a specific instruction.
2 inTEnDED uSE
use of the device that does not comply with the instructions
could present risks to people, nearby installations and the
environment.
Flowmeters 8026 and 8036 and flow transmitter SE36 asso-
ciated with a sensor-fitting are intended to measure the flow rate
of liquids.
▶ Use this device in compliance with the characteristics and
commissioning and use conditions specified in the contractual
documents and in the user manual.
▶ Never use this device for security applications.
▶ Protect this device against electromagnetic interference, ultra-
violet rays and, when installed outdoors, the effects of climatic
conditions.
▶ Use this device only if in perfect working order.
▶ Requirements for the safe and proper operation of the device
are proper transport, storage and installation, as well as careful
operation and maintenance.
▶ Only use the device as intended.
English
5