Installation And Wiring; Safety Instructions - Burkert 8026 Guide Rapide

Type 8026 - 8036 - SE36

Installation and wiring

7 inSTAllATion AnD WirinG
7.1 Safety instructions
Danger
risk of injury due to high pressure in the installation.
▶ Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to electrical voltage.
▶ Disconnect the electrical power for all the conductors and iso-
late it before carrying out work on the system.
▶ Observe all applicable accident protection and safety regula-
tions for electrical equipment.
risk of injury due to the nature of the fluid.
▶ Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
Warning
risk of injury due to non-conforming installation.
▶ The electrical and fluid installation can only be carried out by
qualified and skilled staff with the appropriate tools.
▶ Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
▶ Respect the assembly instructions for the fitting used.
risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
▶ Take appropriate measures to avoid unintentional activation of
the installation.
▶ Guarantee a defined or controlled restarting of the process after
any intervention on the device.
note
the tightness of the device is not guaranteed when the cover
is removed.
▶ Once the cover is removed, prevent the projection of liquid
inside the housing.
the device may be damaged if a metal component comes
into contact with the electronics.
▶ Prevent contact of the electronics with a metal component.
English
15