Installation And Wiring; Safety Instructions - Burkert 8077 Manuel D'utilisation

7

insTAllATion AnD WirinG

7.1

safety instructions

Danger
risk of injury due to electrical voltage.
▶ Disconnect the electrical power source for all the conductors
and isolate it before carrying out work on the system.
▶ Observe all applicable accident protection and safety regula-
tions for electrical equipment.
risk of injury due to high pressure in the installation.
▶ Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to high fluid temperatures.
▶ Use safety gloves to handle the device.
▶ Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
▶ Respect the regulations on accident prevention and safety relating
to the use of aggressive fluid.
12
English
Type 8077
Installation and wiring
Warning
risk of injury due to non-conforming installation.
▶ The electrical and fluid installation can only be carried out by
qualified and authorized personnel with the appropriate tools.
▶ Install overload devices that are appropriate to the electrical
installation.
risk of injury due to unintentional switch on of power supply
or uncontrolled restarting of the installation.
▶ Take appropriate measures to avoid unintentional activation of
the installation.
▶ Guarantee a set or controlled restarting of the process subse-
quent to the installation of the device.