Maintenance And Troubleshooting; Safety Instructions; Maintenance Of The Strainer - Burkert 8077 Manuel D'utilisation

Maintenance and troubleshooting

9 mAinTenAnce AnD
TroubleshooTinG
9.1

safety instructions

Danger
risk of injury due to high pressure in the installation.
▶ Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to electrical voltage.
▶ Shut down and isolate the electrical power source before carry-
ing out work on the system.
▶ Observe all applicable accident protection and safety regula-
tions for electrical equipment.
risk of injury due to the nature of the fluid.
▶ Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
risk of injury due to high fluid temperatures.
▶ Use safety gloves to handle the device.
▶ Stop the circulation of fluid and drain the pipe before loosening
the process connections.
▶ Keep all easily flammable material and fluid away from the
device.
Type 8077
Warning
risk of injury due to non-conforming maintenance.
▶ Maintenance must only be carried out by qualified and skilled
staff with the appropriate tools.
▶ Guarantee a set or controlled restarting of the process, after a
power supply interruption.
9.2

maintenance of the strainer

→
After the circulation of 200 litres of fluid, examine the strainer
for particles. If necessary clean the strainer with a product com-
patible with the materials from which it is made.
→
Regularly examine the strainer for good condition, in particular
when the flow rate decreases. If necessary clean the strainer
with a product compatible with the materials from which it is
made.
English
15