General Information; Manufacturer's Address And International Contact; Warranty Conditions; Information On The Internet - Burkert 8077 Manuel D'utilisation

General information

4 GenerAl informATion
4.1 manufacturer's address and
international contact
To contact the manufacturer of the device, use following address
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at:
www.burkert.com
4.2

Warranty conditions

The condition governing the legal warranty is the conforming use of
the device in observance of the operating conditions specified in this
manual.
4.3

information on the internet

You can find the user manuals and the technical data sheets
regarding the type 8077 at:
www.burkert.com
Type 8077
5

DescripTion

5.1

Area of application

The device is intended to measure, thanks to its oval rotors, the flow
rate of viscous fluids. It must be combined with a remote instrument
(refer to data sheet of the type 8077) which converts the pulse
frequency due to oval rotors rotation.
5.2

General description

5.2.1 construction
The device is built of a fitting which includes oval rotors and of a
cover including the electronic module with Hall effect sensor and
Reed switch.
The oval rotors of the fitting contain magnets.
All the device versions provide an NPN transistor output and a Reed
switch output.
The electrical connection is made by a 1 meter 5-wire cable.
English
7