General Information; Manufacturer's Address And International Contacts; Warranty Conditions; Information On The Internet - Burkert 8025 Manuel D'utilisation

4

gEnErAl informATion

4.1 manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2

Warranty conditions

The condition governing the legal warranty is the conforming use of
the device type 8025 or SE35 in observance of the operating condi-
tions specified in the Operating Instructions.
4.3

information on the internet

You can find the Operating Instructions and technical data sheets
regarding the type SE35 or 8025 at: www.burkert.com
6
English
Type 8025 / SE35, battery powered
Generalinformation
5

DEScripTion

5.1 Description
The device type 8025 is made up of a paddle wheel flow sensor and
an electronic module with a display and a cover with lid. The device
type 8025 must be engaged in a fitting type S020.
The device type SE35 is an electronic module with a display and a
cover with lid. The device type SE35 must be mounted on a sensor-
fitting. A device type SE35 mounted on a sensor-fitting type S030 is
called 8035.
The device is energized by 4 non-rechargeable AA alcaline batteries
of 1.5 V each.
5.2

Description of the name plate

1 2 3
FLOW: 8025 COIL LONG
S/N 10000
00418405
10
9
4
SUPPLY: BATT6V...
5
IP65
W44ME
8 7 6