Installation; Safety Instructions - Burkert 8025 Manuel D'utilisation

Type 8025 / SE35, battery powered
Utilisation range
P fluid (bar)
11
10
9 PVDF
8
PVC + PP
7
6
5
PVC (PN10)
4
3
2
1
0
-15 0 +20
Fig. 4 : Fluid temperature - Fluid pressure dependency curves for the
8025, depending on the material of the fitting S020
Utilisation range
P fluid (bar)
16
15
14
13
12
11
10
9
PVDF
8
PVC + PP
7
6
5
4 PVC (PN10)
3
2
1
0
-30 -10 +10 +30 +50 +70 +90 +110
Fig. 5 : Fluid temperature - Fluid pressure dependency curves for the
sensor-fitting S030, depending on the material it is made of

Installation

Metal
PVDF (PN10)
PP (PN10)
+40 +60 +80
T fluid (°C)
A
Metal
PVDF (PN10)
PP (PN10)
T fluid (°C)
7 inSTAllATion
7.1

Safety instructions

danger
risk of injury due to high pressure in the installation.
▶ Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to electrical voltage.
▶ Put the power switch to OFF before carrying out work on the
device.
▶ Observe all applicable accident protection and safety regula-
tions for electrical equipment.
risk of injury due to high fluid temperatures.
▶ Use safety gloves to handle the device.
▶ Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
▶ Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
Warning
burn injury due to the leakage of the chemicals from the bat-
teries if the batteries are exposed to high temperatures.
▶ Respect the operating temperature of the batteries.
English
11