→
Put back the cover and tighten the 4 screws in an alternating
pattern, to make sure that the device is tight.
→
Adjust the device: see chap. 8.3 to 8.8.
16
English
Type 8025 / SE35, battery powered
Adjustment,Commissioning
8.3
Description of the navigation
keys and the status lED
Device status LED: see
Tab. 4.
Fig. 10 : Foil of the device
• Selecting the displayed
parameter
• Confirming the settings
• Reading the messages
• Scrolling through the
parameters
• Selecting the figure on the
left
• Scrolling up the parameters
• Incrementing the figure
selected