Ryobi APR04 Manuel D'utilisation page 22

that is inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
To remove the pruner attachment from the power head
for storage:
1. Loosen the knob on the coupler device.
2. Push the button in, then twist the shafts to remove and
separate the power head from the attachment.
For storing information: Please refer to the Operator's
Manual of your power head.
ATTACHING THE STORAGE HANGER
See Figure 26.
There are two ways to hang your attachment for storage.
■ To use the hanger cap (8), push in the button (12)
and place the hanger cap over end of the pruner
attachment's shaft (5). Slightly rotate the cap from side
to side until the button locks into place.
■ The hanger hole (33) in the pruner attachment shaft
can be used for hanging purposes as well.
English(Original instructions)
20