User Menu; Date And Time; Holiday Mode - Durlem Vi Mode D'emploi

6.4. User menu

MENU
MENU REGEN UP

6.4.1. Date and time

Date and time
17 - 08 - 16
10 : 03
MENU REGEN UP

6.4.2. Holiday mode

Tap , a dialogue box will appear, asking you whether you wish to switch to holiday mode. Icon
selected once the white frame appears. Tap
block the water softener in phase 4.
Icon will appear on the display. Do not unplug or disconnect the water softener unless the following message appears.
The purpose of «holiday mode» is to stop the water softener while keeping it protected. While in holiday mode, the device
does not use any water or power.
To restart the water softener, plug it in and reconnect it again and tap
Regeneration will resume its cycles, phases 5 and 6. Your water softener will once again be in service mode.
If you do not wish to switch to «holiday mode», tap
You cannot switch the system to «holiday mode» while it is regenerating. The «holiday mode» icon
Tap
time and date, language, activate the holiday mode, the SALT alert and
change the water softener and connectivity settings.
A white frame around an icon means that it has been selected success-
fully.
To select an icon, tap
Tap
DOWN
Day - month - Year
Time - Minutes
DOWN
to validate your selection. Regeneration will be triggered automatically and
0% 17-08-16
To cancel holiday mode:
MENU REGEN
. You will end up in the main screen again:
to access the User Menu. Via this menu, you can adjust the
(to move left) or
to access the subprogram you have selected.
Tap or
encoded before tapping
proceed to the next parameter.
Tap to return to the User Menu.
10:03
tap
UP DOWN
ENGLISH
(to move right).
to change the parameter value
to validate and
will have been
will be inactive.
65