Disposal And Recycling; Trouble Shooting - Scheppach biostar 3000 Traduction Des Instructions D'origine

Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types of
material, such as metal and plastic. Never place de-
fective equipment in your household refuse The equip-
ment should be taken to a suitable collection center for
proper disposal. If you do not know the whereabouts
of such a collection point, you should ask in your local
council offices.
Problem
The motor doesn't start.
The motor doesn't do anything, the
safety default switches on.
The motor is overloaded the safety
default switches on.
The shredder intake is diminished,
reduced cutting capacity.
Excessive vibrations/noise
24 English
Old devices must not be disposed of with house-
hold waste!
equipment (WEEE). This product must be disposed
of at a designated collection point. This can occur, for
example, by handing it in at an authorised collecting
point for the recycling of waste electrical and elec-
tronic equipment. Improper handling of waste equip-
ment may have negative consequences for the envi-
ronment and human health due to potentially
hazardous substances that are often contained in
electrical and electronic equipment. By properly dis-
posing of this product, you are also contributing to the
effective use of natural resources. You can obtain
information on collection points for waste equipment
from your municipal administration, public waste dis-
posal authority, an authorised body for the disposal
of waste electrical and electronic equipment or your
waste disposal company.

Trouble shooting

Possible cause
a) The upper housing unit is not
properly closed.
b) The extension cable is defective.
c) No current is coming out of the
outlet.
d) The switch is defective.
e) The motor is defective, the
capacitor is defective
f) Shredder material is obstructing
the blade disc.
a) The extension cable has an
insufficient cross section
b) The cable between the power
system connection and the
shredder is too long.
a) The quantity of wet shredded
material is too high.
b) The blade and output areas are
clogged.
c) The blade is dull.
d) The cable between the power
system connection and the
shredder is too long.
The blade is either dull or worn out.
a) Blade nut/bolt loose
b) Cutting blade damaged
c) Machine damaged internally
This symbol indicates that this product must not
be disposed of together with domestic waste in
compliance with the Directive (2012/19/EU)
pertaining to waste electrical and electronic
Solutions
a) Screw in the safety thoroughly
b) Exchange the extension cable or
repair it.
c) Check the mains fuse.
d) See Fig. D
e) See Fig. D
f) Pull the main plug, open the
housing and clean it out.
a) Choose an extension cable with
a larger cross section
b) Create the shortest possible
way between the power system
connection and the shredder.
a) Select a smaller quantity of
shredded material. Now and
then, include dry shredding
material
b) Pull the main fuse, open the
housing and clean it out.
c) Resharpen or change
d) Choose an extension cable with
a larger cross section.
Turn blade, sharpen blade or
replace entirely.
a) Tighten blade nut/bolt
b) Replace blade
c) Contact Service Agent