Leica DM5500 B Manuel D'utilisation page 69

Note:
If one of the buttons for changing the operation
mode (DRY or IMM) is pressed by mistake, the
previous mode can be reactivated by pressing
the correct button. The stage will not be lowered
again. The button for the current objective, how-
ever, will remain gray and has to be pressed
again.
Changing the operation mode via:
Leica SmartTouch – navigation item
Variable function keys at the stand and at
the SmartMove
Leica STP6000
Software Leica Application Suite, module:
Acquire
Fig. 70 Immersion objective (released)
Note:
When retrofitting objectives, they have to be
learned in with the Software Leica Application
Suite, module: Set-up. Afterwards, parfocality
should also be learned in again.
Note:
For lockable immersion objectives lock these by
pushing the front part upwards until it stops
(approx. 2 mm). Then, after a gentle turning mo-
tion to the right, the objective is locked (Fig.
71).
For objectives with corrective mounts turn the
knurl to adjust the objective to the thickness of
the cover glass.
Fig. 71 Immersion objective (locked)
8. Operation
69