Leica DM5500 B Manuel D'utilisation page 66

8. Operation
Adjusting the Eyepiece Section to the Arm
Length
• On the AET22 tube, the eyepieces can be
extended up to 30 mm (Fig. 68).
Beam Splitting in Photo Tubes
EDT22 tube:
The beam splitting between the observation and
documentation outputs has a definite presetting
(50:50).
BDT25+ tube:
The beam splitting is set manually by pulling out
a control bar.
Control Bar
VIS
50/50
PHOTO
MBDT25+ tube:
This tube is similar to the documentation tube
BDT25+, but it is motorized.
The control positions are displayed on the status
page of the Leica SmartTouch.
After switching on, the position 100%VIS is set
automatically.
Fig. 68 AET22 tube individual adjustments
66
Observation Photo
100 %
150 % 50 %
110 % 100 %
Key
VIS
50/50
PHOTO
Select beam splitting via:
Leica SmartScree – navigation item
Variable function keys at the stand
Leica STP6000
Software Leica Application Suite, module:
Acquire
HC L 2TU tube:
The beam splitting is set manually by pulling out
a control bar.
Control Bar
0 %
VIS
PHOTO
Using a duo mount, the beamsplitting between
the two cameras is either fixed at 50:50 or
switchable (100% to the camera at the top or
100% to the camera at the back), depending on
the mount.
Fig. 69 BDT25+ tube with digital camera
1 Control bar
Observation
100 %
50 %
0 %
Observation
100 %
110 %
Note:
Photo
0 %
50 %
100 %
Photo
0 %
100 %
1