7. Startup
Note: (Reset-Function)
The microscope can be reset to the default
settings:
• When the microscope is switched off,
press all 3 variable function keys (40.1) on
the left stand section.
• Switch on the stand.
• Hold the keys pressed down until initiali-
zation is completed.
• The standard information is shown in the
LeicaScreen.
• Switch off the instrument and switch it on
again. The settings are stored now.
Fig. 40
Left side of the microscope
1
Variable function keys
1
40
The table on the opposite page shows which mi-
croscope components can be operated with
which control elements.