6. Assembly
Ergomodule
For raising the eye level of the tube opening, the
ergomodule may be used.
It is fastened in place with the side clamping
screw.
Mirror Housing
• Place the mirror housing directly onto the
lamp housing receptacle on the back of the
stand and attach it using the side clamping
screw.
• Place the lamp housing onto the mirror hous-
ing and fasten it using the corresponding
clamping screw on the side.
Fig. 36
1
Insert of Booster Lens
36
Manual Booster Lens
Manual Excitation Manager
• Insert the filter slide into the front receptacle
on the right side of the stand (36.1, 37.1).
• Booster Lens and manual Excitation Manager
can not be used simultaneously.
The motorized Excitation Manager is already
built in at the factory.
Fig. 37
1
Insert of Excitation Manager
1
n.b.:
1