Dru SAXO SL 70 Instructions D'installation Et Mode D'emploi page 25

The built-in height will depend on how the adjustable
feet are set. The feet can be adjusted to the required
length, and can be fixed with self-drilling screws (1) in the
interior, see fig. 1. Build the chimney breast accurately
allowing for the narrow flange on the inside.
Remove the glass window of the combustion chamber.
INSTRUCTIONS FOR INSTALLATION
Now move the appliance into the required position.
Now position the chimney breast as required, allowing
enough space around the heater for the heat to escape.
To ensure a good heat discharge, the chimney breast
must be adequately vented. Once it is in position, fix
the appliance to the wall with the wall brackets (3) and
two expanding shells provided, (see fig. 1). Connect the
appliance.
38c-1263
fig. 1
21
3
2
1
Saxo SL