Disposal; Maintaining The Device - uebe visomat comfort XXL Mode D'emploi

E
Polarity inside plus
Cuff connection
Mains adapter information
When using the optionally available mains adapter:
Protection class II (double insulation)
For indoor use only
Direct current

7. Disposal

Technical equipment and batteries do not belong in
household waste. They must be disposed of at appro-
priate collection and disposal points.
EN-58
Technical information

Maintaining the device

• Keep the device clean. Check for cleanliness after use. Please
use a soft, dry cloth for cleaning. Do not use benzene, thin-
ners or other strong solvents.
• The cuff may absorb sweat and other fluids. Inspect the cuff
for marks or discolourations after each use. Clean the device
using soapy water no warmer than 30 °C and carefully wipe
the surface. Do not scrub or machine-wash. Air-dry thoroughly.
• Make sure that liquid cannot get into the air hose.
• Do not apply force when folding or bending the cuff.
• To separate the cuff from the main device, please do not pull
the air hose, but grip the air connector and gently pull it off.
F
EN-59