Display Of Uncompensated Conductivity; Tcα And Reference Temperature Display (In Conductivity Measuring Ranges Only); Current Output Signal Display; Display Wording At Database Language Level - Ecolab LMIT 08 Notice Technique

8.2.3

Display of uncompensated conductivity

Fig. 8.4
The uncompensated conductivity, i.e. the conductivity actually measured can be displayed by
pressing the SEL key.
Also the initial current value for conductivity changes in relation to the actually measured
NOTE
conductivity value.
8.2.4 TCα and reference temperature display (in conductivity measuring ranges only)
Fig. 8.5
8.2.5

Current output signal display

Fig. 8.6
8.3

Display wording at database language level

Selection from the measuring level using "NEXT".
NOTE
For language selection, see fold-out page at end of manual
Fig. 8.7
The database language displayed is selected by pressing the SEL key.
8.4

Display selection in configuration mode

Fig. 8.8
417101109_LMIT08.doc - 65 - Rev. 3-01.10