Beurer BC 30 Mode D'emploi page 21

or cold temperatures, major temperature fluctuations,
direct exposure to sunlight and heat sources which are
too close (e.g. stoves, heating radiators). This may dam-
age the unit. The device must be stored in the speci-
fied ambient conditions. Please see section "8. Care,
maintenance and storing the instrument" and section
"10. Technical Specifications" for details.
• Do not use any aggressive solvents, cleaning agents,
detergents or any other strong chemicals to clean the
device.
• Never immerse and or spill water or any other liquid
onto the monitor or any components, otherwise liquid
will enter it and cause damage.
• Do not wash the unit in a washing machine, dish wash-
er or tumble dryer.
• Observe the local regulations for material disposal. Dis-
pose of the device, components and optional accessor-
ies according to applicable local regulations. Unlawful
disposal may cause environmental pollution.
• Batteries can contain toxins that are harmful to the en-
vironment. Always dispose of batteries in accordance
with applicable local regulations.
• Never attempt to repair, open and/or disassemble the
unit (including arm cuff and optional accessory) or ad-
just it yourself. This may damage the unit and impair the
functions. If you need to have the unit repaired, please
contact our customer service. Please see warranty for
service contact. Before submitting any complaint, first
check the batteries and replace them if necessary.
• Changes or modifications to the device will nullify the
user warranty.
• Do not drop or insert any object into any opening or
hose. This may damage the unit.
• Do not press the buttons with excessive force or with
pointed objects.
• The monitor can maintain the safety and performance
characteristics for a minimum of 10.000 measurements
or 3 years.
NOTE:
• Further documents which include information for the cali-
bration of the device can be asked at the service address.
• The device can be tested in case of supposed inaccur-
acy every five years. Please contact the nearest service
address.
To keep your digital blood pressure monitor in the best con-
dition and protect the unit from damage follow the direc-
tions listed below:
• Clean your device and cuff carefully only with a slightly
moistened soft cloth and dry it immediately with a soft
dry cloth. Do not press.
• When storing the device, make sure that no heavy objects
are placed on top of it.
21