Cleaning And Care; Cleaning The Milk Frother - SilverCrest SEM 1100 C3 Mode D'emploi

Cleaning and care

WARNING! RISK OF INJURY!
► Always remove the plug from the mains power socket before you clean the
appliance. Risk of electric shock!
► Always allow the appliance to cool down before cleaning it. Risk of burns!
Never immerse the appliance in water or other liquids! Risk of electric
shock!
CAUTION! PROPERTY DAMAGE!
► To avoid damage, never use abrasive, aggressive or chemical cleaning
agents to clean the surfaces of the appliance.

Cleaning the milk frother

1) Place an empty container under the milk frother 0.
2) Immediately after use, turn the steam control 7 to the "
and allow the steam to escape for a few seconds.
3) Turn the steam control 7 off (as far as it will go in the direction "▯"), switch
the appliance off and remove the plug from the mains power socket.
4) Allow the nozzle to cool down.
5) Pull the casing of the milk frother 0 off (Figure 1) and clean it thoroughly in
warm water.
6) Wipe the nozzle under the casing with a damp cloth. If necessary, add a little
mild detergent onto the cloth. After cleaning with detergent, always wipe off
with a cloth moistened with clean water. Ensure that there is no detergent
residue left on the nozzle.
7) Push the casing back onto the nozzle (Figure 1).
SEM 1100 C3
" position
GB │ IE │ 17 ■