Cleaning And Care; Cleaning The Milk Nozzle And Milk Tank - SilverCrest SEMM 1470 A2 Mode D'emploi

Cleaning and care

WARNING! RISK OF INJURY!
■ Always remove the plug from the mains power socket before you clean the
appliance. Danger of electric shock!
Never immerse the appliance in water or other liquids. Danger of
electric shock!
■ Always allow the appliance to cool down before cleaning it. Risk of burns!

Cleaning the milk nozzle and milk tank

CAUTION! PROPERTY DAMAGE
■ Never use abrasive, aggressive or chemical cleaning agents to clean the
appliance. These could damage the outer surfaces of the appliance.
1) Switch the appliance off using the on/off switch i and pull the mains plug
from the wall socket.
2) Remove the milk tank 6 from the appliance and take off the milk tank
lid 4.
3) Clean the milk tank lid 4 and the milk tank 6 in warm water with a little
mild washing-up liquid.
4) Rinse both parts off with clear water and then dry them well.
5) Fill the milk tank 6 with water (approx. 100 ml), replace the milk tank
lid 4 and push the milk tank 6 back into the appliance.
6) Place a suitably large, empty container onto the drip grille 8 and move the
milk nozzle 0 so that it points into the container.
7) Insert the plug into a mains power socket and switch on the appliance using
the on/off switch i.
8) Wait until all control lamps light up permanently.
9) Turn the "Steam quantity" dial 5 to the "Clean"
10) Press the "Large" latte button 3
the "Large" 2
"Large" 3
steam comes out of the milk nozzle 0.
11) Wait until no more steam comes out of the milk nozzle 0. If you want to
stop the cleaning process at anytime, press the "Large" latte button 3
12) Remove the milk tank 6 and empty out any remaining water.
13) Switch the appliance off using the on/off switch i.
SEMM 1470 A2
2x in a row. The control lamps of
and "Small" cappuccino buttons e
and "Small" latte buttons w
position.
, as well as the
flash alternately and hot
GB │ IE │
23
.
■