Manually Resetting The Device To Factory Settings - Medion LIFE P85035 Mode D'emploi

os detected in the WLAN network by their friendly name (see also "20. Accessing
the web interface of the Internet radio" on page 167).
 Select the right Internet radio in order to use the app.
 When prompted, enter the code "1234". You can also reassign this NetRemote
PIN for the Internet radio ("NetRemote PIN-Setup" on page 163).
NOTE
If the WLAN function is deactivated in operating modes that do not re-
quire WLAN (AUX IN, FM radio, DAB radio, USB playback) (setting "Keep
the network connection on standby" on page 164), you will not be able
to control the radio via the Lifestream IR app.
23. Manually resetting the device to factory set-
tings
If the Internet radio no longer responds or if problems occur with the network con-
nection, it may be necessary to reset the device to the factory settings.
In addition to resetting the device using the menu settings ("17.5. Factory settings"
on page 164), you can also reset the Internet radio manually using button combi-
nations.
How to manually reset the Internet radio to its factory settings:
 Disconnect the plug of the supplied mains adapter from the connection DC IN.
 Keep the dial (OK) and the
 Insert the plug of the supplied mains adapter back into the DC IN connection
and keep the dial (OK) and the
appears.
NOTE
All existing network information will have been deleted and will have to
be re-entered to establish a network connection.
168 of 174
button pressed down.
button pressed down until the setup wizard