Selecting Display Brightness; Selecting The Display Language; Resetting The Device To Factory Settings; Software Version - Medion LIFE E66314 Mode D'emploi

various sound settings.

12.4. Selecting display brightness

Select DIMMER in the menu and press
choose from various dimmer settings:
LOW
•
MEDIUM
•
HIGH
•
 Confirm your entry by pressing OK.
or
 Press the
button on the remote control repeatedly in order to choose from
various dimmer settings.

12.5. Selecting the display language

You can set the display language to one of the following languages: English, Ger-
man, Dutch and French. English is the language set at the factory.
 Select SET LANGUAGE in the menu in order to choose the language.
 Confirm your entry by pressing OK.

12.6. Resetting the device to factory settings

Resetting the device will discard your own settings and station presets, and the de-
vice is returned to the state when shipped.
 Select SYSTEM RESET in the menu to reset the device.
 Confirm your entry by pressing OK.
 A confirmation prompt will appear; confirm again by pressing OK.

12.7. Software version

You can view the software version of the device under S/W VERSION.

12.8. Setting audio mode

You can either set the sound to AUTO so that it is output in stereo or mono de-
pending on station, or you can explicitly select MONO for the sound.
Select SET AUDIO MODE in the menu in order to choose between AUTO and
MONO.
 Confirm your entry by pressing OK.

12.9. Setting the alarm

You can use the device as a radio alarm clock. You can set two alarm times.
Proceed as follows to set the alarm:
Before you set the alarm, make sure that the date and time have been set.
 Select SET ALARM in the menu or press the ALARM button on the remote
control to set the alarm time.
116 of 124
/ in order to