Getting Started; Operation; Switch The Device On/Off; Switching The Display Lighting On/Off - Medion LIFE E66567 Notice D'utilisation

8. Getting started

 To start up the device, connect the supplied mains adapter to the connection
socket at the back of the device.
NOTICE!
Possible material damage
Using a non-compatible mains adapter may damage
the device.
 Use only the mains adapter supplied.
 Plug the mains adapter into an easily accessible mains socket (100–240 V ~
50/60 Hz).
 Position the wire antenna.
When you connect the under cabinet radio for the first time, the
automatic station search (AMS) starts as soon as a signal is received. The
stations are automatically stored under memory group A. The device
then performs an automatic time synchronisation. SYNC is shown on
the display. This process can take up to 2 minutes. When synchronisation
is complete, the display shows the current time and the radio switches
to standby mode.
If synchronisation takes longer than 5 minutes, FM reception is
insufficient. Select another installation location for the under cabinet
radio or first press the
described in section "11.1. Setting the time manually" on page 65.

9. Operation

9.1. Switch the device on/off
 Press the
button to switch on the device.
 Press the
button again to switch the device into standby mode.
The device uses a small amount of electricity, even when it is switched
off. To completely switch off the device, unplug the mains adapter from
the power supply.
9.2. Switching the display lighting on/off
 Press the DIM button to switch the display lighting of the under cabinet radio
on or off.
60
button and then set the time manually as