Connecting Devices Via Bluetooth - Medion LIFE E66567 Notice D'utilisation

9.6.4. Preset station selector
 Use the
stations.
If necessary, adjust the wire antenna for optimum reception.
10. Connecting devices via Bluetooth®
 Press the
button to switch on the under cabinet radio.
 If necessary, press the FUNC/USER button or the FUNC button on the remote
control several times until BT is shown on the display.
The pairing LED flashes blue and the under cabinet radio is in search mode.
 Switch on the Bluetooth function on your audio output device and
search mode.
 On your audio output device select your radio "MD 43567" from the list of
available devices and pair the devices.
You will find more information about the Bluetooth function of your
audio output device in its user manual.
The pairing of the two devices is complete when the pairing LED lights up blue
continuously and the under cabinet radio emits an acoustic signal.
 Press the MO/ST/PAIRING button or the PAIRING button on the remote
control to disconnect the current Bluetooth connection and switch the under
cabinet radio back to Bluetooth pairing mode.
You can now pair another audio output device with the under cabinet radio.
 Alternatively, press the MO/ST/PAIRING button again or the PAIRING
button on the remote control to reconnect to the last audio output device
connected via Bluetooth.
10.6.1. start/pause playback
 Press the
controller or the
playing tracks.
 To pause playback, press the
again resumes playback.
10.6.2. Track selection, rewind/fast forward
 During playback, press the
 Press the
button once to skip back to the start of the track.
 Press the
button to play the next track.
 Press and hold the
or buttons to switch between the stored radio
button on the remote control to start
controller or the
button twice to play the previous track.
or button to fast forward or rewind within a track.
enable the
button again. Pressing
DE
EN
FR
NL
IT
ES
63