Status Display - Lenze DeviceNet PT E82ZAFVC010 Instructions De Montage

Status display

Pos Status display
1
Connection status to basic device (LED, green / red)
OFF
BLINKING
GREEN
Constantly ON
BLINKING
RED
Constantly ON
2
Connection status to bus (LED, green / red)
OFF
BLINKING
GREEN
Constantly ON
BLINKING
RED
Constantly ON
EDK82ZAFVC010 DE/EN/FR 2.0
Explanation
Function module is not supplied with voltage,
external voltage supply is switched off
Function module is supplied with voltage but not
connected to the controller.
Reason:
Basic device is
l
switched off
l
is being initialised
l
not available
Function module is supplied with voltage and is
connected to the basic device
Internal error, Lenze setting has been loaded
Internal error of the function module
l
No connection with the master.
l
Function module is not supplied with voltage.
Dup_Mac_ID" test phase. Not yet connected to master
(scanner).
DeviceNet connection completed.
No communication because time limit has been
exceeded
Critical bus error
l
Commissioning
Status display
E82ZAFD101A*
4
63