Status Display - Lenze 2141 LON Instructions De Montage

Show/Hide Bookmarks
Commissioning
5

Status display

Pos LED status
1 1
Green bus LED (voltage supply)
ON
OFF
BLINKING
2 2
Yellow bus LED (communication)
OFF
BLINKING
3
Red and green drive LED indicate the operating mode of the drive controller 82XX or
93XX (see the Operating Instructions of the drive controller)
4 4
Service LED
OFF
BLINKING
ON
40
Explanation -20-
Communication module is supplied with voltage and connected to the
controller.
Communication module is not supplied with voltage. The drive controller
or external voltage supply is switched off.
Communication modul is supplied with voltage but has not (yet) been
connected to the controller because
l
the communication module has not been plugged onto the controller
properly.
l
the data transfer of/to the drive controller is still not possible (e. g. the
drive controller is in the initialisation phase).
Communication module has not been initialised yet.
LON communication active
Normal operating status
Communication module has not been configured yet
Not program available in Neuron.
EDKMF2141 DE/EN/FR 2.0
L