About The Indications In The Display - Sony HT-K250 Mode D'emploi

About the indications in the display

You can change the item layout in the display according to the layout of the control center (page 18).
Vertical display
2 3 4 5
1
FM STEREO
AM MONO
L C R MEMORY
SW L.F.E. DTS
SL S SR
DIGITAL
PLII
0 9 8 7
A AM: Lights up when an AM station is tuned
in.
B FM: Lights up when an FM station is tuned in.
C MONO: Lights up when receiving an FM
station in monaural mode.
D STEREO: Lights up when receiving an FM
station in stereo mode.
E
: Lights up when the disc being
L.F.E.
played back contains the LFE (Low Frequency
Effect) channel and when the sound of the
LFE channel signal is actually being
reproduced.
F MEMORY: Lights up when presetting radio
station.
G DTS: Lights up when the system is decoding
DTS signals.
H ; DIGITAL: Lights up when the system is
decoding Dolby Digital signals.
I ; PL (II): Lights up when the system applies
Pro Logic or Pro Logic (II) processing.
6
1
MHz
2
KHz
Horizontal display
2 3 4
1
FM
AM
STEREO
MONO
0 7
J Playback channel indicators: The letters
light up to indicate the channels being played
back.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SW (Subwoofer)
The boxes around the letters light up to
indicate the speakers used to playback the
channels.
Example:
Recording format (Front/Surround): 3/2
Sound Field: A.F.D. AUTO.
L C
SW
SL
6 1 2 5
MHz
KHz
MEMORY
L C R
L.F.E.
SW
SL S SR
DTS
DIGITAL
PLII
9 8
R
SR
continued
GB
17