Dvd Player - Sony HT-K250 Mode D'emploi

Setting for when you use Sony DVD player or "Play Station 2"
When you connect DVD player or "Play Station 2" as shown on the previous page, perform the
following settings on each component. For details, refer to the operating instructions supplied with each
component.

DVD player

1
Select "AUDIO SETUP" in the setup
display.
2
Set "AUDIO DRC" to "WIDE RANGE".
3
Set "DIGITAL OUT" to "ON".
4
Set "DOLBY DIGITAL" to "DOLBY
DIGITAL".
5
Set "DTS" to "ON".
"Play Station 2" is a trademark of Sony Computer Entertainment.
"Play Station 2"
1
Select "AUDIO SETTING" in the setup
display.
2
Select "AUDIO DIGITAL OUTPUT".
3
Set "OPTICAL DIGITAL OUTPUT" to
"ON".
4
Set "DOLBY DIGITAL" to "ON".
5
Set "DTS" to "ON".
GB
7